Items where Subject is "Engineering"

Article

Abadah, Great O. (2023) A Model of Footstep Generator. Journal of Engineering Research and Reports, 24 (5). pp. 56-63. ISSN 2582-2926

Agunwamba, J. C. and Amah, V. E. (2022) Exponential Model for Adsorption Kinetics. Journal of Engineering Research and Reports, 23 (8). pp. 35-41. ISSN 2582-2926

Akhtar, Nazneen and Khan, Sehresh and Rehman, Shafiq Ur and Rehman, Zia Ur and Mashwani, Zia Ur Rehman and Rha, Eui Shik and Jamil, Muhammad and Kumar, Amit (2021) Zinc Oxide Nanoparticles Enhance the Tolerance and Remediation Potential of Bacillus spp. against Heavy Metal Stress. Adsorption Science & Technology, 2021. pp. 1-16. ISSN 0263-6174

Ali, Kashir and Javaid, Muhammad Ussama and Ali, Zaman and Zaghum, Muhammad Junaid and Narayanasamy, Selvaraju (2021) Biomass-Derived Adsorbents for Dye and Heavy Metal Removal from Wastewater. Adsorption Science & Technology, 2021. pp. 1-14. ISSN 0263-6174

Almusawi, Husam and Husi, Géza (2021) Design and Development of Continuous Passive Motion (CPM) for Fingers and Wrist Grounded-Exoskeleton Rehabilitation System. Applied Sciences, 11 (2). p. 815. ISSN 2076-3417

Alorabi, Ali Q. and Kyzas, George (2021) Effective Removal of Malachite Green from Aqueous Solutions Using Magnetic Nanocomposite: Synthesis, Characterization, and Equilibrium Study. Adsorption Science & Technology, 2021. pp. 1-15. ISSN 0263-6174

Alsuwaiyan, Abdullah S. (2024) Stiffness Characteristics of a Basic Nonlinear Air Spring Model. World Journal of Engineering and Technology, 12 (03). pp. 455-465. ISSN 2331-4222

Amoozgar, Mohammadreza and Friswell, Michael I. and Fazelzadeh, Seyed Ahmad and Haddad Khodaparast, Hamed and Mazidi, Abbas and Cooper, Jonathan E. (2021) Aeroelastic Stability Analysis of Electric Aircraft Wings with Distributed Electric Propulsors. Aerospace, 8 (4). p. 100. ISSN 2226-4310

An, Young-Hyeon and Kim, Su-Hwan (2021) Facile Fabrication of Three-Dimensional Hydrogel Film with Complex Tissue Morphology. Bioengineering, 8 (11). p. 164. ISSN 2306-5354

Arshad, Muhammad Haseeb and Kassas, Mahmoud and Hussein, Alaa E. and Abido, Mohammad A. (2021) A Simple Technique for Studying Chaos Using Jerk Equation with Discrete Time Sine Map. Applied Sciences, 11 (1). p. 437. ISSN 2076-3417

Atia, Doaa M. and Farghally, Hanaa M. and Ahmed, Ninet M. and El-Madany, Hanaa T. (2017) Organic Rankine Cycle Based Geothermal Energy for Power Generation in Egypt. Energy and Power Engineering, 09 (12). pp. 814-828. ISSN 1949-243X

Aust, Jonas and Pons, Dirk (2021) Methodology for Evaluating Risk of Visual Inspection Tasks of Aircraft Engine Blades. Aerospace, 8 (4). p. 117. ISSN 2226-4310

Basuki, Rahmat and Rusdiarso, Bambang and Santosa, Sri Juari and Siswanta, Dwi and Kyzas, George (2021) Magnetite-Functionalized Horse Dung Humic Acid (HDHA) for the Uptake of Toxic Lead(II) from Artificial Wastewater. Adsorption Science & Technology, 2021. pp. 1-15. ISSN 0263-6174

Belc, Nastasia and Duta, Denisa Eglantina and Culetu, Alina and Stamatie, Gabriela Daniela (2021) Type and Amount of Legume Protein Concentrate Influencing the Technological, Nutritional, and Sensorial Properties of Wheat Bread. Applied Sciences, 11 (1). p. 436. ISSN 2076-3417

Bieńkowska, Agnieszka and Tworek, Katarzyna (2021) The Moderating Role of IT in Process of Shaping Organizational Performance by Dynamic Capabilities of Controlling. Applied Sciences, 11 (2). p. 889. ISSN 2076-3417

Błachnio, Józef and Chalimoniuk, Marek and Kułaszka, Artur and Borowczyk, Henryk and Zasada, Dariusz (2021) Exemplification of Detecting Gas Turbine Blade Structure Defects Using the X-ray Computed Tomography Method. Aerospace, 8 (4). p. 119. ISSN 2226-4310

Camp, Allyson and Pastrano, Amanda and Gomez, Valeria and Stephenson, Kathleen and Delatte, William and Perez, Brianna and Syas, Hunter and Guiseppi-Elie, Anthony (2021) Understanding ADHD: Toward an Innovative Therapeutic Intervention. Bioengineering, 8 (5). p. 56. ISSN 2306-5354

Chang, Rong and Sha, Aimin and Zhao, Pinxue and Huang, Songchang and Qi, Cong and Guo, Meng (2021) Evaluation of Susceptibility of Asphalt Binders to Rutting through MSCR Test. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

Chen, Man and Zhang, Bin and Feng, Yuqing and Wang, Liang and Wang, He (2021) Numerical and Experimental Studies of the Attenuation Characteristics of Friction Torque in a Wet Multidisc Clutch. Applied Sciences, 11 (2). p. 814. ISSN 2076-3417

Chen, Yangmengfan and Menger, Maximilian M. and Braun, Benedikt J. and Schweizer, Sara and Linnemann, Caren and Falldorf, Karsten and Ronniger, Michael and Wang, Hongbo and Histing, Tina and Nussler, Andreas K. and Ehnert, Sabrina (2021) Modulation of Macrophage Activity by Pulsed Electromagnetic Fields in the Context of Fracture Healing. Bioengineering, 8 (11). p. 167. ISSN 2306-5354

Chen, Yue and Cui, Jiwen and Sun, Xun (2021) An Assembly Method for the Multistage Rotor of An Aero-Engine Based on the Dual Objective Synchronous Optimization for the Coaxality and Unbalance. Aerospace, 8 (4). p. 94. ISSN 2226-4310

Chen, Yue and Cui, Jiwen and Sun, Xun (2021) An Unbalance Optimization Method for a Multi-Stage Rotor Based on an Assembly Error Propagation Model. Applied Sciences, 11 (2). p. 887. ISSN 2076-3417

Chen, Zhongyu and Fang, Jianhong and Ming, Feng and Liu, Yuhang and Hay, Rotana (2021) Early Age Hydration Characteristics of Calcium Sulphoaluminate Cement Mortar Cured at a Temperature Range from −10 to 20°C. Advances in Materials Science and Engineering, 2021. pp. 1-13. ISSN 1687-8434

Cheng, Dan and Yang, Zhaohai and Liang, Yilan and Rehman, Rabia (2022) Preparation and Energy Storage Performance of Perovskite Luminescent Materials by an Electrochemiluminescence Method. Adsorption Science & Technology, 2022. pp. 1-10. ISSN 0263-6174

Chu, Chenfeng and Zhu, Jing and Wang, Zi-ang and Černý, Robert (2021) Investigation of the Road Performance of AH-30 Bitumen and Its Mixture: Comparison with AH-70 and SBS-Modified Bitumen. Advances in Materials Science and Engineering, 2021. pp. 1-11. ISSN 1687-8434

Cruz, Daniel Magalhães da and Silva, Antonio Henrique Monteiro da Fonseca Thomé da and Clain, Fernanda Mazuco and Guilherme, Carlos Eduardo Marcos (2022) Experimental study on the behavior of polyamide multifilament subject to impact loads under different soaking conditions. Engineering Solid Mechanics, 11 (1). pp. 23-34. ISSN 22918744

Dang, Zheng and Wang, Xiaoming and Hou, Shihui and Pan, Sidong and Gollakota, Anjani Ravi Kiran (2022) Effect of Analytical Particle Size on Pore Structure of High Volatile Bituminous Coal and Anthracite Using Low-Pressure N2 and CO2 Adsorption. Adsorption Science & Technology, 2022. pp. 1-14. ISSN 0263-6174

Daouda, Abdourahimoun and Madougou, Saïdou and Ibrahim, Abdoul Aziz (2017) Global Harmonic Rate Assessment in the Electricity Distribution Network in Niamey City: Case Studies of Domestic, Industrial and Hospital Substations. Energy and Power Engineering, 09 (12). pp. 786-801. ISSN 1949-243X

Del Angel, Gilberto Garcia and Aghajanian, Ali and Tamayo, Pablo and Rico, Jokin and Thomas, Carlos (2021) Siderurgical Aggregate Cement-Treated Bases and Concrete Using Foundry Sand. Applied Sciences, 11 (1). p. 435. ISSN 2076-3417

Deng, Zhiyang and Qian, Dingkun and Hong, Haifei and Song, Xiaochun and Kang, Yihua (2024) Evaluation of Depth Size Based on Layered Magnetization by Double-Sided Scanning for Internal Defects. Sensors, 24 (11). p. 3689. ISSN 1424-8220

Devi, G. Ramya and Priya, C. B. and Dineshbabu, C. and Karthick, R. and Thanigavelmurugan, K. and Paramasivam, Prabhu and Barik, Debabrata (2022) Modelling and Deliberation of Multireinforcement Surface on Tribothermal Adsorption Performance of Nickel Alloy Matrix Hybrid Nanocomposite. Adsorption Science & Technology, 2022. pp. 1-11. ISSN 0263-6174

Dong, Lei and Peng, Bo and Chen, Xi and Liu, Jiachen (2024) Analysis and Evaluation of Fault Propagation Behavior in Integrated Avionics Systems Considering Cascading Failures. Aerospace, 11 (8). p. 608. ISSN 2226-4310

Durodola, O. I. and Falana, O. B. (2022) Multimodal Remote Sensing and Machine Learning for Precision Agriculture: A Review. Journal of Engineering Research and Reports, 23 (8). pp. 30-34. ISSN 2582-2926

Elango, D. and Daniel Das, A. and Kumaresh Babu, S. P. and Natarajan, S. and Yeshitla, A. and Chelladurai, Samson Jerold Samuel (2021) Electrochemical Studies of WC-Flyash HVOF Coating Interface on SA209-T1 Steel under 3.5 NaCl Solution. Advances in Materials Science and Engineering, 2021. pp. 1-9. ISSN 1687-8434

Fan, Yunpeng and Zhang, Chong and He, Hongtao and Zhang, Fengwei and Zhang, Yongkang and Riveiro, Antonio (2021) Arc Welding-Laser Shock Forging Process for Improving the Mechanical Properties of the Fe-Cr-C Cladded Layer. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

Fort, Chiara and Modugno, Michele (2021) Self-Evaporation Dynamics of Quantum Droplets in a 41K-87Rb Mixture. Applied Sciences, 11 (2). p. 866. ISSN 2076-3417

Gao, Xiufang and Jiang, Li and Mao, Yilin and Yao, Bin and Jiang, Peihua and Bing, Haijian (2021) Progress, Challenges, and Perspectives of Bioleaching for Recovering Heavy Metals from Mine Tailings. Adsorption Science & Technology, 2021. pp. 1-13. ISSN 0263-6174

Guo, Jin-Jun and Liu, Peng-Qiang and Wu, Cun-Liang and Wang, Kun (2021) Effect of Dry–Wet Cycle Periods on Properties of Concrete under Sulfate Attack. Applied Sciences, 11 (2). p. 888. ISSN 2076-3417

Gutiérrez Álvarez, Javier and Bisagni, Chiara (2021) A Study on Thermal Buckling and Mode Jumping of Metallic and Composite Plates. Aerospace, 8 (2). p. 56. ISSN 2226-4310

He, Feng and Yang, Song and Ren, Tianjiao and Bian, Hongjie and Li, Haoran and Wang, Yonghong (2021) An Improved Bingham Model and the Parameter Identification of Coal (Rock) Containing Water Based on the Fractional Calculus Theory. Advances in Materials Science and Engineering, 2021. pp. 1-9. ISSN 1687-8434

Hoa, Dang Thi Ngoc and Tu, Nguyen Thi Thanh and Son, Le Van Thanh and Son, Le Vu Truong and Toan, Tran Thanh Tam and Thong, Pham Le Minh and Nhiem, Dao Ngoc and Lieu, Pham Khac and Khieu, Dinh Quang and Le, Thanh Son (2021) Electrochemical Determination of Diclofenac by Using ZIF-67/g-C3N4 Modified Electrode. Adsorption Science & Technology, 2021. pp. 1-14. ISSN 0263-6174

Hofmann, Jonas and Knopp, Andreas and Spooner, Chad M. and Minelli, Giovanni and Newman, James (2021) Spectral Correlation for Signal Presence Detection and Frequency Acquisition of Small Satellites. Aerospace, 8 (2). p. 57. ISSN 2226-4310

Huang, Shunyu and Li, Jingji and Wang, Jipeng and Fan, Qiaohui (2021) Clay Minerals Change the Toxic Effect of Cadmium on the Activities of Leucine Aminopeptidase. Adsorption Science & Technology, 2021. pp. 1-14. ISSN 0263-6174

Ianni, Federica and Altomare, Alessandra Anna and Cenci-Goga, Beniamino T. and Blasi, Francesca and Grispoldi, Luca and Regazzoni, Luca and Cossignani, Lina (2021) Chromatographic Characterization and In Vitro Bioactivity Evaluation of Lactobacillus helveticus Hydrolysates upon Fermentation of Different Substrates. Applied Sciences, 11 (2). p. 811. ISSN 2076-3417

Ingelsten, Simon and Mark, Andreas and Kádár, Roland and Edelvik, Fredrik (2021) A Backwards-Tracking Lagrangian-Eulerian Method for Viscoelastic Two-Fluid Flows. Applied Sciences, 11 (1). p. 439. ISSN 2076-3417

Ivanov, Danil and Monakhova, Uliana and Guerman, Anna and Ovchinnikov, Mikhail (2021) Decentralized Control of Nanosatellite Tetrahedral Formation Flying Using Aerodynamic Forces. Aerospace, 8 (8). p. 199. ISSN 2226-4310

Ji, Danyang and Ma, Zheng and Zhou, Junjie and Li, Yajun and Shao, Shuai and Yuan, Bingxiang (2021) A Coupled Discrete-Finite Element Method for Shear Strength Analysis of Geogrid-Reinforced Railway Ballast. Advances in Materials Science and Engineering, 2021. pp. 1-11. ISSN 1687-8434

Kim, Hee Jin and Jo, Ye Joon and Choi, Jun Seok and Kim, Hyo Joon and Kim, Jin and Moon, Seong Yong (2021) Anatomical Risk Factors of Inferior Alveolar Nerve Injury Association with Surgical Extraction of Mandibular Third Molar in Korean Population. Applied Sciences, 11 (2). p. 816. ISSN 2076-3417

Knöös Franzén, Ludvig and Staack, Ingo and Krus, Petter and Jouannet, Christopher and Amadori, Kristian (2021) A Breakdown of System of Systems Needs Using Architecture Frameworks, Ontologies and Description Logic Reasoning. Aerospace, 8 (4). p. 118. ISSN 2226-4310

Kouroupis, Dimitrios and Best, Thomas M. and Kaplan, Lee D. and Correa, Diego and Griswold, Anthony J. (2021) Single-Cell RNA-Sequencing Identifies Infrapatellar Fat Pad Macrophage Polarization in Acute Synovitis/Fat Pad Fibrosis and Cell Therapy. Bioengineering, 8 (11). p. 166. ISSN 2306-5354

Kreheľ, Radoslav and Szentivanyi, Patrik and Kočiško, Marek and Pollák, Martin and Giannopoulos, Georgios I. (2021) Technical and Economic Description of the Research on a Measuring Device for Continuous Measurement of the Diameter and Vibration of the Workpiece during the Machining Process. Advances in Materials Science and Engineering, 2021. pp. 1-9. ISSN 1687-8434

Li, Anjun and Zhou, Gaoqiang and Zhang, Xianggang and Meng, Ercong and Memon, Shazim A. (2021) Compressive Mechanical Properties of a Novel Recycled Aggregate Concrete with Recycled Lightweight Aggregate. Advances in Materials Science and Engineering, 2021. pp. 1-13. ISSN 1687-8434

Li, Cheng and Chunlong, Wang and Xi, Wang and Kexu, Chen and Song, Zhengyang (2021) Stability Analysis of Surrounding Rock of Large Section Ultradeep Shaft Wall. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

Li, Zechuang and Liu, Zhibin and Yi, Hao (2021) Influence of Particle Shape on the Macroscopic and Mesolevel Mechanical Properties of Slip Zone Soil Based on 3D Scanning and 3D DEM. Advances in Materials Science and Engineering, 2021. pp. 1-14. ISSN 1687-8434

Lohani, Sanjaya and Kirby, Brian T and Brodsky, Michael and Danaci, Onur and Glasser, Ryan T (2020) Machine learning assisted quantum state estimation. Machine Learning: Science and Technology, 1 (3). 035007. ISSN 2632-2153

Lu, Hongna and Zhang, Huagang and Ma, Kejian and Wu, Qin and Jiang, Lan and Hay, Rotana (2021) Experimental Study and Numerical Study on Shear Bearing Capacity of Shear Key Joints of Reinforced Concrete Open-Web Sandwich Plates. Advances in Materials Science and Engineering, 2021. pp. 1-22. ISSN 1687-8434

Lyu, Yanlin and Jamil, Muhammad and Ma, Pengfei and He, Ning and Gupta, Munish Kumar and Khan, Aqib Mashood and Pimenov, Danil Yurievich (2021) An Ultrasonic-Based Detection of Air-Leakage for the Unclosed Components of Aircraft. Aerospace, 8 (2). p. 55. ISSN 2226-4310

Ma, Yuanzhen and Wang, Meng and Ma, Ruying and Li, Jiamin and Bake, Asiya and Shan, Yadi and Tran, Nguyen Hai (2021) Micropore Characteristics and Gas-Bearing Characteristics of Marine-Continental Transitional Shale Reservoirs in the East Margin of Ordos Basin. Adsorption Science & Technology, 2021. pp. 1-15. ISSN 0263-6174

Mallis, Panagiotis and Michalopoulos, Efstathios and Panagouli, Effrosyni and Dimou, Zetta and Sarri, Eirini Faidra and Georgiou, Eleni and Gkioka, Vasiliki and Stavropoulos-Giokas, Catherine (2021) Selection Criteria of Cord Blood Units for Platelet Gel Production: Proposed Directions from Hellenic Cord Blood Bank. Comment on Mallis et al. Short Term Results of Fibrin Gel Obtained from Cord Blood Units: A Preliminary in Vitro Study. Bioengineering 2019, 6, 66. Bioengineering, 8 (5). p. 53. ISSN 2306-5354

Marquis, Yewande Alice (2024) From Theory to Practice: Implementing Effective Role-Based Access Control Strategies to Mitigate Insider Risks in Diverse Organizational Contexts. Journal of Engineering Research and Reports, 26 (5). pp. 138-154. ISSN 2582-2926

McGarry, Shannon P. D. and Neilson, Brittany N. and Brown, Noelle L. and Strong, Kaylin D. and Greenlee, Eric T. and Klein, Martina I. and Coyne, Joseph T. (2023) An investigation of cardiac vagal tone over time and its relation to vigilance performance: a growth curve modeling approach. Frontiers in Neuroergonomics, 4. ISSN 2673-6195

Miao, Mingda and Gao, Xueshan and Zhu, Wei (2021) A Construction Method of Lower Limb Rehabilitation Robot with Remote Control System. Applied Sciences, 11 (2). p. 867. ISSN 2076-3417

Mintsa, Honorine Angue and Eny, Gérémino Ella and Senouveau, Nzamba and Nzué, Rolland Michel Assoumou (2023) Optimal Tuning PID Controller Gains from Ziegler-Nichols Approach for an Electrohydraulic Servo System. Journal of Engineering Research and Reports, 25 (11). pp. 158-166. ISSN 2582-2926

Mohan Kumar, A. and Rajasekar, R. and Manoj Kumar, P. and Parameshwaran, R. and Karthick, Alagar and Mohanavel, V. and Sakthi, T. and Muhibbullah, M. and Xu, Jinyang (2021) Investigation of Drilling Process Parameters of Palmyra Based Composite. Advances in Materials Science and Engineering, 2021. pp. 1-9. ISSN 1687-8434

Mou, Chunhui and Li, Hui and Dong, Ning and Hui, Shien and Wang, Denghui and Salvestrini, Stefano (2021) Effect of Ce Addition on Adsorption and Oxidation of NO over MnO x /Al2O3. Adsorption Science & Technology, 2021. pp. 1-8. ISSN 0263-6174

Muhammad, Farooq and Jalal, Shawnam and Maraşlı, Necmettin (2021) A Comparative Study of the Impact of the Stirrer Design in the Stir Casting Route to Produce Metal Matrix Composites. Advances in Materials Science and Engineering, 2021. pp. 1-15. ISSN 1687-8434

Mårtensson, Hans (2021) Harmonic Forcing from Distortion in a Boundary Layer Ingesting Fan. Aerospace, 8 (3). p. 58. ISSN 2226-4310

Nedelcu, Andreea and Mosteanu, Ofelia and Pop, Teodora and Mocan, Teodora and Mocan, Lucian (2021) Recent Advances in Nanoparticle-Mediated Treatment of Inflammatory Bowel Diseases. Applied Sciences, 11 (1). p. 438. ISSN 2076-3417

Odineze, M. C. and Olowokere, J. A. (2023) Kinetic Study and Modeling of Nigerian Sub Bituminous Coal Char Using the Random Pore Technique. Journal of Engineering Research and Reports, 25 (9). pp. 28-38. ISSN 2582-2926

Park, Tae-Yong and Shin, Seok-Jin and Oh, Hyun-Ung (2021) New Version of High-Damping PCB with Multi-Layered Viscous Lamina. Aerospace, 8 (8). p. 202. ISSN 2226-4310

Park, Yeon-Hyeok and Kwon, Seong-Cheol and Koo, Kyung-Rae and Oh, Hyun-Ung (2021) High Damping Passive Launch Vibration Isolation System Using Superelastic SMA with Multilayered Viscous Lamina. Aerospace, 8 (8). p. 201. ISSN 2226-4310

Peng, Song Yi (2024) Numerical Simulation Study of Wall Thickness Change Rule of Single Point Progressive Molding of Al5083. Journal of Engineering Research and Reports, 26 (8). pp. 258-268. ISSN 2582-2926

Perpignan, André A. V. and Tomasello, Stella Grazia and Rao, Arvind Gangoli (2021) Evolution of Emission Species in an Aero-Engine Turbine Stator. Aerospace, 8 (1). p. 11. ISSN 2226-4310

Pisoni, Galena and Díaz-Rodríguez, Natalia and Gijlers, Hannie and Tonolli, Linda (2021) Human-Centered Artificial Intelligence for Designing Accessible Cultural Heritage. Applied Sciences, 11 (2). p. 870. ISSN 2076-3417

Porro, Marco and Jefferson-Loveday, Richard and Benini, Ernesto (2021) Axial Flow Compressor Stability Enhancement: Circumferential T-Shape Grooves Performance Investigation. Aerospace, 8 (1). p. 12. ISSN 2226-4310

Prakash, K. B. and Fageehi, Yahya Ali and Saminathan, Rajasekaran and Manoj Kumar, P. and Saravanakumar, S. and Subbiah, Ram and Arulmurugan, B. and Rajkumar, S and Xu, Jinyang (2021) Influence of Fiber Volume and Fiber Length on Thermal and Flexural Properties of a Hybrid Natural Polymer Composite Prepared with Banana Stem, Pineapple Leaf, and S-Glass. Advances in Materials Science and Engineering, 2021. pp. 1-11. ISSN 1687-8434

Rajagopal, Rajinikanth and Mousavi, Seyyed Ebrahim and Goyette, Bernard and Adhikary, Suman (2021) Coupling of Microalgae Cultivation with Anaerobic Digestion of Poultry Wastes: Toward Sustainable Value Added Bioproducts. Bioengineering, 8 (5). p. 57. ISSN 2306-5354

Ramzan, Muhammad and Shahmir, Nazia (2023) Significance of Nanoparticles Aggregation with Cattaneo-Christov Heat Flux on the Water and Ethylene Glycol Mixture Based MWCNTs-Nanofluid Flow over a Stretching Cylinder. World Journal of Engineering and Technology, 11 (04). pp. 1019-1029. ISSN 2331-4222

Ren, Jingjing and Zheng, Liuchun and Yang, Feixiong and Yu, Huajian and Zhang, Tao and Zhou, Qianya and Zeng, Hao and Zhang, Lijuan and Meng, Peipei and Selvasembian, Rangabhashiyam (2021) Electron-Scale Insights into the Single and Coadsorption Cd(II) Behaviors of a Metal-Nonmetal-Modified Titanium Dioxide. Adsorption Science & Technology, 2021. pp. 1-15. ISSN 0263-6174

Reynel-Ávila, H. E. and Camacho-Aguilar, K. I. and Bonilla-Petriciolet, A. and Mendoza-Castillo, D. I. and González-Ponce, H. A. and Trejo-Valencia, R. and Azevedo, Diana C. S. (2021) Engineered Magnetic Carbon-Based Adsorbents for the Removal of Water Priority Pollutants: An Overview. Adsorption Science & Technology, 2021. pp. 1-41. ISSN 0263-6174

Ribeiro, Marta and Ellerbroek, Joost and Hoekstra, Jacco (2021) Velocity Obstacle Based Conflict Avoidance in Urban Environment with Variable Speed Limit. Aerospace, 8 (4). p. 93. ISSN 2226-4310

Rijal, Girdhari (2021) Understanding the Role of Fibroblasts following a 3D Tumoroid Implantation for Breast Tumor Formation. Bioengineering, 8 (11). p. 163. ISSN 2306-5354

Rodriguez-Gonzalez, Claudia and Ospina-Betancourth, Carolina and Sanabria, Janeth (2021) High Resistance of a Sludge Enriched with Nitrogen-Fixing Bacteria to Ammonium Salts and Its Potential as a Biofertilizer. Bioengineering, 8 (5). p. 55. ISSN 2306-5354

Sahoo, Satyajeet and Gopalan, Anitha and Ramesh, S. and Nirmala, P. and Ramkumar, G. and Agnes Shifani, S. and Subbiah, Ram and Isaac JoshuaRamesh Lalvani, J. and Ganeshan, P (2021) Preparation of Polymeric Nanomaterials Using Emulsion Polymerization. Advances in Materials Science and Engineering, 2021. pp. 1-9. ISSN 1687-8434

Samad, Abdallah and Villeneuve, Eric and Blackburn, Caroline and Morency, François and Volat, Christophe (2021) An Experimental Investigation of the Convective Heat Transfer on a Small Helicopter Rotor with Anti-Icing and De-Icing Test Setups. Aerospace, 8 (4). p. 96. ISSN 2226-4310

Shaffaf, Tina and Ghafar-Zadeh, Ebrahim (2021) COVID-19 Diagnostic Strategies Part II: Protein-Based Technologies. Bioengineering, 8 (5). p. 54. ISSN 2306-5354

Shaikh, Sarang and Daudpota, Sher Muhammad and Imran, Ali Shariq and Kastrati, Zenun (2021) Towards Improved Classification Accuracy on Highly Imbalanced Text Dataset Using Deep Neural Language Models. Applied Sciences, 11 (2). p. 869. ISSN 2076-3417

Shan, Ke and Bao, Chonghao and Li, Dandan and Zheng, Chuanfeng and Aparicio, Santiago (2021) Microscopic Analysis of the Rejuvenation Mechanism and Rejuvenation Effect of Asphalt Binders. Advances in Materials Science and Engineering, 2021. pp. 1-11. ISSN 1687-8434

Shi, Yi and Gao, Xianhui and Wei, Wei and Chen, Youguo and Ruffino, Francesco (2021) Development of Array-Based Gold Nanoclusters for Discrimination of CA125 Overexpressed Serum Samples. Advances in Materials Science and Engineering, 2021. pp. 1-7. ISSN 1687-8434

Siddiqui, Shaziya H. and Uddin, Mohammad Kashif and Isaac, Runit and Aldosari, Obaid F. and Chen, Qiao (2022) An Effective Biomass for the Adsorption of Methylene Blue Dye and Treatment of River Water. Adsorption Science & Technology, 2022. pp. 1-13. ISSN 0263-6174

Song, Jae-Sil and Park, Yong Seob and Kim, Nam-Hoon (2021) Hydrophobic Anti-Reflective Coating of Plasma-Enhanced Chemical Vapor Deposited Diamond-Like Carbon Thin Films with Various Thicknesses for Dye-Sensitized Solar Cells. Applied Sciences, 11 (1). p. 358. ISSN 2076-3417

Srinivasan, V. P. and Sandeep, Ch. and Shanthi, C. and Bejaxhin, A. Bovas Herbert and Anandan, R. and Abisha Meji, M. and Barik, Debabrata (2022) Comparative Study on EDM Parameter Optimization for Adsorbed Si3N4–TiN using TOPSIS and GRA Coupled with TLBO Algorithm. Adsorption Science & Technology, 2022. pp. 1-19. ISSN 0263-6174

Srujan, M. J. and Srikanth, Seelam (2023) Experimental analysis of spliced joint connections in GFRP short column. Engineering Solid Mechanics, 11 (4). pp. 411-418. ISSN 22918744

Sudarni, Dyan Hatining Ayu and Aigbe, Uyiosa Osagie and Ukhurebor, Kingsley Eghonghon and Onyancha, Robert Birundu and Kusuma, Heri Septya and Darmokoesoemo, Handoko and Osibote, Otolorin Adelaja and Balogun, Vincent Aizebeoje and Widyaningrum, Bernadeta Ayu and Salvestrini, Stefano (2021) Malachite Green Removal by Activated Potassium Hydroxide Clove Leaf Agrowaste Biosorbent: Characterization, Kinetic, Isotherm, and Thermodynamic Studies. Adsorption Science & Technology, 2021. pp. 1-15. ISSN 0263-6174

Sun, Yulong and Zheng, Haoxin and Pu, Yanfeng and Yang, Hao and Wang, Jianhong and Zhou, Shuaishuai and Li, Qian and Qiao, Congzhen and Rather, Sami-ullah (2022) Ultrahigh Adsorption Capacity Zirconium-Magnesium Composite Oxide Nanoclusters Remove Malachite Green from Aqueous Media. Adsorption Science & Technology, 2022. pp. 1-12. ISSN 0263-6174

Teng, Shuai and Liu, Zongchao and Chen, Gongfa and Cheng, Li (2021) Concrete Crack Detection Based on Well-Known Feature Extractor Model and the YOLO_v2 Network. Applied Sciences, 11 (2). p. 813. ISSN 2076-3417

Tsubosaka, Masanori and Maruyama, Masahiro and Huang, Elijah Ejun and Zhang, Ning and Utsunomiya, Takeshi and Gao, Qi and Shen, Huaishuang and Li, Xueping and Kushioka, Junichi and Hirata, Hirohito and Yao, Zhenyu and Yang, Yunzhi Peter and Goodman, Stuart B. (2021) Effect on Osteogenic Differentiation of Genetically Modified IL4 or PDGF-BB Over-Expressing and IL4-PDGF-BB Co-Over-Expressing Bone Marrow-Derived Mesenchymal Stromal Cells In Vitro. Bioengineering, 8 (11). p. 165. ISSN 2306-5354

Tsushima, Natsuki and Saitoh, Kenichi and Arizono, Hitoshi and Nakakita, Kazuyuki (2021) Structural and Aeroelastic Studies of Wing Model with Metal Additive Manufacturing for Transonic Wind Tunnel Test by NACA 0008 Example. Aerospace, 8 (8). p. 200. ISSN 2226-4310

Uchida, Takanori (2017) CFD Prediction of the Airflow at a Large-Scale Wind Farm above a Steep, Three-Dimensional Escarpment. Energy and Power Engineering, 09 (13). pp. 829-842. ISSN 1949-243X

Uchida, Takanori (2017) High-Resolution Micro-Siting Technique for Large Scale Wind Farm Outside of Japan Using LES Turbulence Model. Energy and Power Engineering, 09 (12). pp. 802-813. ISSN 1949-243X

Velychkovych, Andrii and Ropyak, Liubomyr and Dubei, Olga and Colangelo, Francesco (2021) Strength Analysis of a Two-Layer PETF-Concrete Column with Allowance for Contact Interaction between Layers. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

Venkatesh, R. and Karthi, N. and Kawin, N. and Prakash, T. and Kannan, C. Ramesh and Karthigairajan, M. and Bobe, Ketema and Barik, Debabrata (2022) Synthesis and Adsorbent Performance of Modified Biochar with Ag/MgO Nanocomposites for Heat Storage Application. Adsorption Science & Technology, 2022. pp. 1-14. ISSN 0263-6174

Wang, Yaru and Gao, Yingying and Zhu, Zongqiang and Zhang, Lihao and Zhao, Ningning and Fang, Yali and Zhu, Yinian and Liu, Guifeng and Tran, Hai Nguyen (2021) Enhanced Arsenic Removal from Aqueous Solution by Fe/Mn-C Layered Double Hydroxide Composite. Adsorption Science & Technology, 2021. pp. 1-12. ISSN 0263-6174

Wang, Yusong and Wang, Yidi and Zheng, Wei (2021) On-Orbit Pulse Phase Estimation Based on CE-Adam Algorithm. Aerospace, 8 (4). p. 95. ISSN 2226-4310

Xiong, Rongwei and Gao, Xiufang and Huang, Jinquan and Mao, Yilin and Jiang, Peihua and Jiang, Li and Du, Huihui (2021) Ecological Treatment and Resource Utilization of Wastewater from a Chicken Transfer Station. Adsorption Science & Technology, 2021. pp. 1-12. ISSN 0263-6174

Xu, Gang and Qian, Biao and Zheng, Liying and Liu, Wei (2021) Preliminary Evaluation of Nanobacteria on Crystal Retention, CaSR, and Claudin-14 Expression in HK-2 Cells. Advances in Materials Science and Engineering, 2021. pp. 1-9. ISSN 1687-8434

Xu, Ning and Huang, Kexin and Li, Weiguang and Han, Xin and Han, Lijuan and Li, Chanchan and Ares, Alicia E. (2021) Partially Replacing the Emulsified Asphalt in Cement Emulsified Asphalt Mortars with Epoxy Emulsion: Mechanical Properties and Durability Study. Advances in Materials Science and Engineering, 2021. pp. 1-13. ISSN 1687-8434

Xu, YouWu and Yao, Jian and Hu, Feng and Zhou, Ying and Jiang, Shuai and Hay, Rotana (2021) Seismic Behavior of Elliptical Concrete-Filled Steel Tubular Columns under Combined Axial Compression and Cyclic Lateral Loading. Advances in Materials Science and Engineering, 2021. pp. 1-14. ISSN 1687-8434

Yan, Ge and Wang, Pu and Li, Yuqian and Qin, Zhangjie and Lan, Shuai and Yan, Yupeng and Zhang, Qin and Cheng, Xiaodi and Guo, Xue Tao (2021) Adsorption-Oxidation Mechanism of δ-MnO2 to Remove Methylene Blue. Adsorption Science & Technology, 2021. pp. 1-12. ISSN 0263-6174

Yang, Deming and Yin, Yifan and Wang, Zhengguang and Zhu, Biyun and Gu, Qiang (2017) Multi-Effect Evaporation Coupled with MVR Heat Pump Thermal Integration Distillation for Separating Salt Containing Methanol Wastewater. Energy and Power Engineering, 09 (12). pp. 772-785. ISSN 1949-243X

Yang, Jia and Liu, Xiao and Li, Wei and Giorgio, Ivan (2021) Numerical Analysis on Flexural Behaviors of Prestressed Reinforced Concrete Beams Strengthened with NSM CFRP Strips. Advances in Materials Science and Engineering, 2021. pp. 1-15. ISSN 1687-8434

Yang, Jiaping and Yao, Xiling and Cai, Yuxin and Bi, Guijun (2021) Multiphysics Modeling, Sensitivity Analysis, and Optical Performance Optimization for Optical Laser Head in Additive Manufacturing. Applied Sciences, 11 (2). p. 868. ISSN 2076-3417

Yang, Yuan and Liu, Xin and Luo, Lin and Wei, Wenjing and Wang, Qiang and Zhang, Jiachao and Bing, Haijian (2021) Quantitative Detection of Zinc Oxide Nanoparticle in Environmental Water by Cloud Point Extraction Combined ICP-MS. Adsorption Science & Technology, 2021. pp. 1-10. ISSN 0263-6174

Yi, Qilin and Wei, Gang and Cao, Zhengqin and Wu, Xiaoyu and Gao, Yuanyuan and Kooh, Muhammad Raziq Rahimi (2022) Adsorption Properties of NF3 and N2O on Al- and Ga-Doped Graphene Surface: A Density Functional Theory Study. Adsorption Science & Technology, 2022. pp. 1-15. ISSN 0263-6174

Yin, Huanhuan and Luo, Jiehao and Wang, Baobing and Zhang, Bing and Luo, Shuang and Kong, Dejin (2024) Novel Waveform Design with a Reduced Cyclic Prefix in MIMO Systems. Electronics, 13 (10). p. 1968. ISSN 2079-9292

Zhang, Xijun and Fang, Hongyuan and Du, Mingrui and Shi, Mingsheng and Zhang, Chao and Pavlík, Zbyšek (2021) Experimental Study on the Mechanical Properties of the Fiber Cement Mortar Containing Polyurethane. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

Zhang, Yufei and Yang, Pu and Li, Runze and Chen, Haixin (2021) Unsteady Simulation of Transonic Buffet of a Supercritical Airfoil with Shock Control Bump. Aerospace, 8 (8). p. 203. ISSN 2226-4310

Zhao, Chenwei and Tu, Zecan and Mao, Junkui (2021) Investigation of the Film-Cooling Performance of 2.5D Braided Ceramic Matrix Composite Plates with Preformed Hole. Aerospace, 8 (4). p. 116. ISSN 2226-4310

Zhao, Xiaolan and Wu, Wangsuo and Pan, Duoqiang and Wu, Hanyu and Du, Huihui (2022) Study on the Behaviors and Mechanism of Ni(II) Adsorption at the Hydroxyapatite-Water Interface: Effect of Particle Size. Adsorption Science & Technology, 2022. pp. 1-9. ISSN 0263-6174

Zulli, Daniele and Casalotti, Arnaldo and Luongo, Angelo (2021) Static Response of Double-Layered Pipes via a Perturbation Approach. Applied Sciences, 11 (2). p. 886. ISSN 2076-3417

Şahin, Emrah and Esen, İsmail and Trzepieciński, Tomasz (2021) Statistical and Experimental Investigation of Hardened AISI H11 Steel in CNC Turning with Alternative Measurement Methods. Advances in Materials Science and Engineering, 2021. pp. 1-17. ISSN 1687-8434

Book Section

Agale, Priyanand and Sadgir, Parag (2021) Aerobic Brickbat Grit Sand (ABGS) Purifier: The New Technology for Treatment of Wastewater in Rural India. In: New Approaches in Engineering Research Vol. 7. B P International, pp. 110-121. ISBN 978-93-91473-55-6

Arunkumar, G. and Yuvaraja, S. (2021) Study on the Investigation on Design and Finite Element Analysis of a Compliant Clutch Fork Using Topology Optimization. In: New Approaches in Engineering Research Vol. 7. B P International, pp. 87-95. ISBN 978-93-91473-55-6

Ayoariyo, Ayeni Conqueror and Atolagbe, A. M. O. (2021) Determining the Mechanism on Ventilation for Thermal Comfort in Residential Buildings: A Case of Government Housing Estates in Nigeria. In: New Approaches in Engineering Research Vol. 15. B P International, pp. 149-153. ISBN 978-93-5547-064-5

Bamisaye, Ayodeji. J. (2020) Reverse Link Performance of CDMA Systems with RAKE Receiver and Multiple Access Interference Cancellation. In: Emerging Trends in Engineering Research and Technology Vol. 4. B P International, pp. 105-116. ISBN 978-93-90149-01-8

Bonok, Zainudin and Asmara, B. P. and Abdussamad, S. (2022) Development of Virtual Office Information System Services in Basic Telecommunication Technique Practices. In: Technological Innovation in Engineering Research Vol. 5. B P International, pp. 69-75. ISBN 978-93-5547-500-8

Chanagala, Satyanarayana and Khan, Z. J. (2021) An Investigative Approach to Enhance the Sensor Node Life by Mitigating the Recovery Effect of the Battery. In: New Approaches in Engineering Research Vol. 7. 978-93-91473-55-6, pp. 96-109. ISBN 978-93-91473-55-6

Daud, Kamarulazhar and Sarohe, Syazreena and Saidon, Wan Salha and Omar, Saodah and Ismail, Nurlida and Kasim, Nazirah Mohamat (2022) Determination of RMS based Continuous S-Transform with Deep Learning for Detecting and Classifying Voltage Sag and Swell. In: Technological Innovation in Engineering Research Vol. 5. B P International, pp. 86-98. ISBN 978-93-5547-500-8

Deepthi, K. and Gottapu, Kusuma and Bireddi, Eswararao (2021) Assessment of Power Quality Performance Using Change Detection and DFT. In: Advanced Aspects of Engineering Research Vol. 11. B P International, pp. 134-145. ISBN 978-93-90888-54-2

Gong, Xiao and Li, Fan and Sun, Bo and Liu, Dong (2022) Study on Collaborative Optimization of Multi-Energy Complementary Combined Cooling, Heating, and Power Systems Considering Schedulable Loads. In: Novel Perspectives of Engineering Research Vol. 5. B P International, pp. 29-48. ISBN Dr. Giovanni Bucci Novel Perspectives of Engineering Research Vol. 5 01 04 2022 01 04 2022 9789355474186 Book Publisher International (a part of SCIENCEDOMAIN International) 10.9734/bpi/nper/v5 https://stm.bookpi.org/NPER-V5/issue/view/513

González, Carlos Raúl Navarro and Sánchez, Juan Carlos Quiroz and Ortiz, Alicia López and González, Yanet Villarreal and Zepeda, Pedro Alberto Escárcega and Alarcón, Rigoberto Zamora and Corona, Ana Laura Sánchez (2021) Evaluation of Ergonomic Conditions with Notch Sensor Used in the Electronics Industry of Mexicali, Mexico. In: Advanced Aspects of Engineering Research Vol. 1. B P International, pp. 74-82. ISBN 978-93-90149-85-8

Gupta, Pushpendra and Roy, Joydeep and Saha, S. C. (2021) Effect of Boron Trioxide Enriched Fluxes on the Microstructure and Mechanical Properties in Submerged Arc Welded Mild Steel Plates. In: Advanced Aspects of Engineering Research Vol. 1. B P International, pp. 83-89. ISBN 978-93-90149-85-8

Ibrahim, S. Syed and Kandasamy, S. and Pradeepkumar, S. and Subashchandrabose, R. (2022) Strength and Ductility Performance of GFRP Laminated RC Beams with Discrete Steel Fibres. In: Novel Perspectives of Engineering Research Vol. 5. B P International, pp. 12-28. ISBN 978-93-5547-419-3

Izvoltova, Jana and Pisca, Peter (2021) Study on Combinatorial Algorithm in Linear Model. In: Advanced Aspects of Engineering Research Vol. 11. B P International, pp. 92-97. ISBN 978-93-90888-54-2

Jagdish, Mukta (2020) Monitoring and Identifying the Occurrence of Oil Spill in the Ocean Using Satellite Image for Disaster Mitigation: Advanced Study. In: Emerging Trends in Engineering Research and Technology Vol. 4. B P International, pp. 88-94. ISBN 978-93-90149-01-8

Jiang, Kun and Gu, Pingwei and Huang, Peng and Zhang, Ying and Duan, Bin and Zhang, Chenghui (2022) Determining the Hazards Analysis of Nickel-Rich Lithium-Ion Battery Thermal Runaway under Different States of Charge. In: Novel Perspectives of Engineering Research Vol. 5. B P International, pp. 49-62. ISBN 978-93-5547-419-3

Kaur, Puneet (2024) Adaptive Charging System for PEM Fuel Cells Using a 4-Switch Buck-Boost. In: Current Approaches in Engineering Research and Technology Vol. 9. BP International, pp. 112-126. ISBN 978-93-48388-28-5

Kozelkov, O. V. and Kashaev, R. S. and Safiullin, B. R. (2021) Study of Paraffins in Petroleum Oils by Nuclear Magnetic Resonance Relaxometry. In: New Approaches in Engineering Research Vol. 7. B P International, pp. 122-131. ISBN 978-93-91473-55-6

Krishna, Addepalli V. N. and Balamurugan, M. (2020) A New Model for Population Analysis among Different States in India using Machine Learning Algorithm. In: Emerging Trends in Engineering Research and Technology Vol. 4. B P International, pp. 117-121. ISBN 978-93-90149-01-8

Kumar, Raj and Samar, Kapil Kumar and Jain, Sudhir and Mohanty, Sonali Swetapadma (2022) Economic Evaluation of Passive Solar Distillation System: A Recent Study. In: Technological Innovation in Engineering Research Vol. 5. B P International, pp. 99-104. ISBN 978-93-5547-500-8

Kusnadi, Adhi and Wella, . and Winantyo, Rangga and Pane, I. Z. (2022) Investigating the PCA Effect on the 3D Face Recognition System Speed. In: Technological Innovation in Engineering Research Vol. 5. B P International, pp. 76-85. ISBN 978-93-5547-500-8

Lymperis, Ioannis N. (2024) Ultimate Anti-Seismic Design Method: A Novel Approach. In: Current Approaches in Engineering Research and Technology Vol. 1. B P International, pp. 157-201. ISBN 978-81-972413-0-7

Mikhov, Mikho and Zhilevski, Marin (2021) Critical Study and Performance Improvement of the Drive Systems for a Class of Machine Tools. In: Advanced Aspects of Engineering Research Vol. 1. B P International, pp. 90-97. ISBN 978-93-90149-85-8

Mishra, Banipriya and Mishra, Supriya (2022) An Approach towards Traditional Judicial Systems to Digital Forms of Evidence. In: Technological Innovation in Engineering Research Vol. 5. B P International, pp. 105-117. ISBN 978-93-5547-500-8

Mukunthan, B. and Arunkrishna, M. (2021) Efficient Synergetic Filtering in Big Dataset Using Deep Neural Network Technique. In: Advanced Aspects of Engineering Research Vol. 11. B P International, pp. 116-133. ISBN 978-93-90888-54-2

Muralimohan, N. and Sudha, P. and Palanisamy, T. (2020) Comprehensive Study on Removal Efficiency of Strychonomous Potatorum and Alum as Blended Coagulant for Treatment of Textile Effluent. In: Emerging Trends in Engineering Research and Technology Vol. 4. B P International, pp. 80-87. ISBN 978-93-90149-01-8

Naik, B. T. and Krishna, M. V. S. Murali and Sri, P. Usha (2022) Determining the Performance Parameters of Carbureted Butanol and Plastic Oil Blended with Diethyl Ether. In: Novel Perspectives of Engineering Research Vol. 5. B P International, pp. 63-76. ISBN 978-93-5547-419-3

Nene, Sinqobile Wiseman (2024) Developing State Space Models for Power Tapping and Injection in Capacitor-Coupled Substations within Transmission Networks. In: Current Approaches in Engineering Research and Technology Vol. 9. BP International, pp. 156-174. ISBN 978-93-48388-28-5

Park, Chanho and Kwon, Minho and Suh, Myungwon and Kim, Hyunsoo and Hwang, Sung-Ho (2021) Virtual Integrated Development Environment for the Performance Analysis of Electric Vehicles. In: Advanced Aspects of Engineering Research Vol. 11. B P International, pp. 106-115. ISBN Dr. Anuj Kumar Goel Advanced Aspects of Engineering Research Vol. 11 05 19 2021 05 19 2021 9789390888467 Book Publisher International (a part of SCIENCEDOMAIN International) 10.9734/bpi/aaer/v11 https://stm.bookpi.org/AAER-V11/issue/view/125

Priya, V. and Priya, C. (2020) A Prudence Introspection of Road Accident Prediction through Deep Learning. In: Emerging Trends in Engineering Research and Technology Vol. 4. B P International, pp. 95-104. ISBN 978-93-90149-01-8

Ragul, G. and Ganguly, Arjit and Roy, Pallab and Ghosh, Sandip and Roy, Abhijit (2021) Investigating the Effect of Mechanical Properties of Composite Material under the Influence of Different Commercial Oils. In: Novel Perspectives of Engineering Research Vol. 4. B P International, pp. 177-187. ISBN 978-93-5547-358-5

Ragul, G. and Roy, Pallab and Ganguly, Arjit and Ghosh, Sandip and Sankar, S. and Roy, Abhijit (2021) Studies on Optimization of Tool Wear in Hard Turning of EN 24 Steel Using DoE and Verification through ANOVA and RSM. In: Novel Perspectives of Engineering Research Vol. 4. B P International, pp. 169-176. ISBN 978-93-5547-358-5

Rashmi, N. and Hamsavahini, R. and Mamatha, K. R. (2021) Studies on RF Energy Harvesting for Low Power Devices. In: New Approaches in Engineering Research Vol. 7. B P International, pp. 132-140. ISBN 978-93-91473-55-6

Reddy, A. Nanda Gopal and Bhatnagar, Roheet (2021) A Comprehensive Survey on Data Mining Techniques for Logical Analysis of Data in Content Based Image Retrieval System. In: Novel Perspectives of Engineering Research Vol. 4. B P International, pp. 161-168. ISBN 978-93-5547-358-5

Rushdi, Ali Muhammad Ali and Alsalami, Omar Mutab (2021) Multistate Reliability Evaluation of Communication Networks via Multi-Valued Karnaugh Maps and Exhaustive Search. In: Advanced Aspects of Engineering Research Vol. 1. B P International, pp. 114-136. ISBN 978-93-90149-85-8

S., Guruprasad and N., Veena and Mahalakshmi, S. (2021) Application of EEG Signals – A Case Study. In: Advanced Aspects of Engineering Research Vol. 11. B P International, pp. 98-105. ISBN 978-93-90888-54-2

Shaligram, Brahmane Jayant (2022) Study on Organisational Capability and Their Strategic Impact on Firms Market Share. In: Novel Perspectives of Engineering Research Vol. 5. B P International, pp. 77-82. ISBN 978-93-5547-419-3

Stanciu, Ioana (2024) Technological Process of Obtaining Sunflower Oil. In: Current Approaches in Engineering Research and Technology Vol. 9. BP International, pp. 88-111. ISBN 978-93-48388-28-5

Venkadeshwaran, K. and Misra, D. (2021) Numerical Study on 3-D Laser Forming by Discrete Section Circle Line Heating. In: Advanced Aspects of Engineering Research Vol. 1. B P International, pp. 98-113. ISBN 978-93-90149-85-8

Vijayashree, T. and Gopal, A. (2021) Study on Authentication of Classes of Tulsi Leaf for the Extraction of Medicinal Qualities Using Image Processing Technique. In: Novel Perspectives of Engineering Research Vol. 4. B P International, pp. 153-160. ISBN 978-93-5547-358-5

Woo, SangMin and Jeong, HyunJoon and Choi, JinYoung and Cho, HyungMin and Kong, Jeong-Taek and Kim, SoYoung (2024) Machine-Learning-Based Compact Modeling and Model Parameter Extraction for Sub-3-nm-Node Emerging Transistors. In: Current Approaches in Engineering Research and Technology Vol. 9. BP International, pp. 127-155. ISBN 978-93-48388-28-5