Comparative Study on EDM Parameter Optimization for Adsorbed Si3N4–TiN using TOPSIS and GRA Coupled with TLBO Algorithm

Srinivasan, V. P. and Sandeep, Ch. and Shanthi, C. and Bejaxhin, A. Bovas Herbert and Anandan, R. and Abisha Meji, M. and Barik, Debabrata (2022) Comparative Study on EDM Parameter Optimization for Adsorbed Si3N4–TiN using TOPSIS and GRA Coupled with TLBO Algorithm. Adsorption Science & Technology, 2022. pp. 1-19. ISSN 0263-6174

[thumbnail of 4112448.pdf] Text
4112448.pdf - Published Version

Download (1MB)

Abstract

Electrical discharge machining is a thermo-physical-based material removal technique. 25 combinations of process variables were formulated with the aid of Taguchi technique for EDM of adsorbed Si3N4–TiN. Machining variables like pulse current, pulse-on time, pulse-off time, dielectric pressure, and spark gap voltage varied, and impact of each variables on the performance metrics (MRR, EWR, SR, ROC, θ, CIR, and CYL) was assessed. MCDM strategies like grey relational analysis and TOPSIS are utilized to find out the ideal arrangement of machining parameters to achieve most acute productivity of the multitude of reactions. Likewise, metaheuristic algorithm in particular GRA combined with teaching-learning-based optimization algorithm is utilized for getting global optimized input factors. Important factors like pulse current, pulse-on time, and spark gap voltage characteristically affect the outputs. It is recognized that the pulse-on time and the pulse current are the most significant input factors than others. The ideal machining parameters in view of GRA and TOPSIS techniques for acquiring better output factors are I, 12 amps; PON, 7 μsec; POFF, 4 μsec; DP, 12 kg/cm2; and SV, 36 volts.

Item Type: Article
Subjects: European Scholar > Engineering
Depositing User: Managing Editor
Date Deposited: 24 Feb 2023 05:41
Last Modified: 23 Sep 2024 05:21
URI: http://article.publish4promo.com/id/eprint/683

Actions (login required)

View Item
View Item