Items where Subject is "Engineering"

Group by: Creators | Item Type
Jump to: A | B | C | D | G | H | I | J | K | L | M | N | O | P | R | S | T | U | V | X | Y | Z | Ş
Number of items at this level: 106.

A

Abadah, Great O. (2023) A Model of Footstep Generator. Journal of Engineering Research and Reports, 24 (5). pp. 56-63. ISSN 2582-2926

Agale, Priyanand and Sadgir, Parag (2021) Aerobic Brickbat Grit Sand (ABGS) Purifier: The New Technology for Treatment of Wastewater in Rural India. In: New Approaches in Engineering Research Vol. 7. B P International, pp. 110-121. ISBN 978-93-91473-55-6

Agunwamba, J. C. and Amah, V. E. (2022) Exponential Model for Adsorption Kinetics. Journal of Engineering Research and Reports, 23 (8). pp. 35-41. ISSN 2582-2926

Akhtar, Nazneen and Khan, Sehresh and Rehman, Shafiq Ur and Rehman, Zia Ur and Mashwani, Zia Ur Rehman and Rha, Eui Shik and Jamil, Muhammad and Kumar, Amit (2021) Zinc Oxide Nanoparticles Enhance the Tolerance and Remediation Potential of Bacillus spp. against Heavy Metal Stress. Adsorption Science & Technology, 2021. pp. 1-16. ISSN 0263-6174

Ali, Kashir and Javaid, Muhammad Ussama and Ali, Zaman and Zaghum, Muhammad Junaid and Narayanasamy, Selvaraju (2021) Biomass-Derived Adsorbents for Dye and Heavy Metal Removal from Wastewater. Adsorption Science & Technology, 2021. pp. 1-14. ISSN 0263-6174

Alorabi, Ali Q. and Kyzas, George (2021) Effective Removal of Malachite Green from Aqueous Solutions Using Magnetic Nanocomposite: Synthesis, Characterization, and Equilibrium Study. Adsorption Science & Technology, 2021. pp. 1-15. ISSN 0263-6174

Alsuwaiyan, Abdullah S. (2024) Stiffness Characteristics of a Basic Nonlinear Air Spring Model. World Journal of Engineering and Technology, 12 (03). pp. 455-465. ISSN 2331-4222

An, Young-Hyeon and Kim, Su-Hwan (2021) Facile Fabrication of Three-Dimensional Hydrogel Film with Complex Tissue Morphology. Bioengineering, 8 (11). p. 164. ISSN 2306-5354

Arshad, Muhammad Haseeb and Kassas, Mahmoud and Hussein, Alaa E. and Abido, Mohammad A. (2021) A Simple Technique for Studying Chaos Using Jerk Equation with Discrete Time Sine Map. Applied Sciences, 11 (1). p. 437. ISSN 2076-3417

Arunkumar, G. and Yuvaraja, S. (2021) Study on the Investigation on Design and Finite Element Analysis of a Compliant Clutch Fork Using Topology Optimization. In: New Approaches in Engineering Research Vol. 7. B P International, pp. 87-95. ISBN 978-93-91473-55-6

Atia, Doaa M. and Farghally, Hanaa M. and Ahmed, Ninet M. and El-Madany, Hanaa T. (2017) Organic Rankine Cycle Based Geothermal Energy for Power Generation in Egypt. Energy and Power Engineering, 09 (12). pp. 814-828. ISSN 1949-243X

Ayoariyo, Ayeni Conqueror and Atolagbe, A. M. O. (2021) Determining the Mechanism on Ventilation for Thermal Comfort in Residential Buildings: A Case of Government Housing Estates in Nigeria. In: New Approaches in Engineering Research Vol. 15. B P International, pp. 149-153. ISBN 978-93-5547-064-5

B

Bamisaye, Ayodeji. J. (2020) Reverse Link Performance of CDMA Systems with RAKE Receiver and Multiple Access Interference Cancellation. In: Emerging Trends in Engineering Research and Technology Vol. 4. B P International, pp. 105-116. ISBN 978-93-90149-01-8

Belc, Nastasia and Duta, Denisa Eglantina and Culetu, Alina and Stamatie, Gabriela Daniela (2021) Type and Amount of Legume Protein Concentrate Influencing the Technological, Nutritional, and Sensorial Properties of Wheat Bread. Applied Sciences, 11 (1). p. 436. ISSN 2076-3417

Bonok, Zainudin and Asmara, B. P. and Abdussamad, S. (2022) Development of Virtual Office Information System Services in Basic Telecommunication Technique Practices. In: Technological Innovation in Engineering Research Vol. 5. B P International, pp. 69-75. ISBN 978-93-5547-500-8

C

Camp, Allyson and Pastrano, Amanda and Gomez, Valeria and Stephenson, Kathleen and Delatte, William and Perez, Brianna and Syas, Hunter and Guiseppi-Elie, Anthony (2021) Understanding ADHD: Toward an Innovative Therapeutic Intervention. Bioengineering, 8 (5). p. 56. ISSN 2306-5354

Chanagala, Satyanarayana and Khan, Z. J. (2021) An Investigative Approach to Enhance the Sensor Node Life by Mitigating the Recovery Effect of the Battery. In: New Approaches in Engineering Research Vol. 7. 978-93-91473-55-6, pp. 96-109. ISBN 978-93-91473-55-6

Chang, Rong and Sha, Aimin and Zhao, Pinxue and Huang, Songchang and Qi, Cong and Guo, Meng (2021) Evaluation of Susceptibility of Asphalt Binders to Rutting through MSCR Test. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

Chen, Man and Zhang, Bin and Feng, Yuqing and Wang, Liang and Wang, He (2021) Numerical and Experimental Studies of the Attenuation Characteristics of Friction Torque in a Wet Multidisc Clutch. Applied Sciences, 11 (2). p. 814. ISSN 2076-3417

Chen, Yue and Cui, Jiwen and Sun, Xun (2021) An Assembly Method for the Multistage Rotor of An Aero-Engine Based on the Dual Objective Synchronous Optimization for the Coaxality and Unbalance. Aerospace, 8 (4). p. 94. ISSN 2226-4310

Chu, Chenfeng and Zhu, Jing and Wang, Zi-ang and Černý, Robert (2021) Investigation of the Road Performance of AH-30 Bitumen and Its Mixture: Comparison with AH-70 and SBS-Modified Bitumen. Advances in Materials Science and Engineering, 2021. pp. 1-11. ISSN 1687-8434

Cruz, Daniel Magalhães da and Silva, Antonio Henrique Monteiro da Fonseca Thomé da and Clain, Fernanda Mazuco and Guilherme, Carlos Eduardo Marcos (2022) Experimental study on the behavior of polyamide multifilament subject to impact loads under different soaking conditions. Engineering Solid Mechanics, 11 (1). pp. 23-34. ISSN 22918744

D

Dang, Zheng and Wang, Xiaoming and Hou, Shihui and Pan, Sidong and Gollakota, Anjani Ravi Kiran (2022) Effect of Analytical Particle Size on Pore Structure of High Volatile Bituminous Coal and Anthracite Using Low-Pressure N2 and CO2 Adsorption. Adsorption Science & Technology, 2022. pp. 1-14. ISSN 0263-6174

Daouda, Abdourahimoun and Madougou, Saïdou and Ibrahim, Abdoul Aziz (2017) Global Harmonic Rate Assessment in the Electricity Distribution Network in Niamey City: Case Studies of Domestic, Industrial and Hospital Substations. Energy and Power Engineering, 09 (12). pp. 786-801. ISSN 1949-243X

Daud, Kamarulazhar and Sarohe, Syazreena and Saidon, Wan Salha and Omar, Saodah and Ismail, Nurlida and Kasim, Nazirah Mohamat (2022) Determination of RMS based Continuous S-Transform with Deep Learning for Detecting and Classifying Voltage Sag and Swell. In: Technological Innovation in Engineering Research Vol. 5. B P International, pp. 86-98. ISBN 978-93-5547-500-8

Deepthi, K. and Gottapu, Kusuma and Bireddi, Eswararao (2021) Assessment of Power Quality Performance Using Change Detection and DFT. In: Advanced Aspects of Engineering Research Vol. 11. B P International, pp. 134-145. ISBN 978-93-90888-54-2

Del Angel, Gilberto Garcia and Aghajanian, Ali and Tamayo, Pablo and Rico, Jokin and Thomas, Carlos (2021) Siderurgical Aggregate Cement-Treated Bases and Concrete Using Foundry Sand. Applied Sciences, 11 (1). p. 435. ISSN 2076-3417

Deng, Zhiyang and Qian, Dingkun and Hong, Haifei and Song, Xiaochun and Kang, Yihua (2024) Evaluation of Depth Size Based on Layered Magnetization by Double-Sided Scanning for Internal Defects. Sensors, 24 (11). p. 3689. ISSN 1424-8220

Durodola, O. I. and Falana, O. B. (2022) Multimodal Remote Sensing and Machine Learning for Precision Agriculture: A Review. Journal of Engineering Research and Reports, 23 (8). pp. 30-34. ISSN 2582-2926

G

Gong, Xiao and Li, Fan and Sun, Bo and Liu, Dong (2022) Study on Collaborative Optimization of Multi-Energy Complementary Combined Cooling, Heating, and Power Systems Considering Schedulable Loads. In: Novel Perspectives of Engineering Research Vol. 5. B P International, pp. 29-48. ISBN Dr. Giovanni Bucci Novel Perspectives of Engineering Research Vol. 5 01 04 2022 01 04 2022 9789355474186 Book Publisher International (a part of SCIENCEDOMAIN International) 10.9734/bpi/nper/v5 https://stm.bookpi.org/NPER-V5/issue/view/513

González, Carlos Raúl Navarro and Sánchez, Juan Carlos Quiroz and Ortiz, Alicia López and González, Yanet Villarreal and Zepeda, Pedro Alberto Escárcega and Alarcón, Rigoberto Zamora and Corona, Ana Laura Sánchez (2021) Evaluation of Ergonomic Conditions with Notch Sensor Used in the Electronics Industry of Mexicali, Mexico. In: Advanced Aspects of Engineering Research Vol. 1. B P International, pp. 74-82. ISBN 978-93-90149-85-8

Gupta, Pushpendra and Roy, Joydeep and Saha, S. C. (2021) Effect of Boron Trioxide Enriched Fluxes on the Microstructure and Mechanical Properties in Submerged Arc Welded Mild Steel Plates. In: Advanced Aspects of Engineering Research Vol. 1. B P International, pp. 83-89. ISBN 978-93-90149-85-8

Gutiérrez Álvarez, Javier and Bisagni, Chiara (2021) A Study on Thermal Buckling and Mode Jumping of Metallic and Composite Plates. Aerospace, 8 (2). p. 56. ISSN 2226-4310

H

He, Feng and Yang, Song and Ren, Tianjiao and Bian, Hongjie and Li, Haoran and Wang, Yonghong (2021) An Improved Bingham Model and the Parameter Identification of Coal (Rock) Containing Water Based on the Fractional Calculus Theory. Advances in Materials Science and Engineering, 2021. pp. 1-9. ISSN 1687-8434

Hoa, Dang Thi Ngoc and Tu, Nguyen Thi Thanh and Son, Le Van Thanh and Son, Le Vu Truong and Toan, Tran Thanh Tam and Thong, Pham Le Minh and Nhiem, Dao Ngoc and Lieu, Pham Khac and Khieu, Dinh Quang and Le, Thanh Son (2021) Electrochemical Determination of Diclofenac by Using ZIF-67/g-C3N4 Modified Electrode. Adsorption Science & Technology, 2021. pp. 1-14. ISSN 0263-6174

Hofmann, Jonas and Knopp, Andreas and Spooner, Chad M. and Minelli, Giovanni and Newman, James (2021) Spectral Correlation for Signal Presence Detection and Frequency Acquisition of Small Satellites. Aerospace, 8 (2). p. 57. ISSN 2226-4310

Huang, Shunyu and Li, Jingji and Wang, Jipeng and Fan, Qiaohui (2021) Clay Minerals Change the Toxic Effect of Cadmium on the Activities of Leucine Aminopeptidase. Adsorption Science & Technology, 2021. pp. 1-14. ISSN 0263-6174

I

Ibrahim, S. Syed and Kandasamy, S. and Pradeepkumar, S. and Subashchandrabose, R. (2022) Strength and Ductility Performance of GFRP Laminated RC Beams with Discrete Steel Fibres. In: Novel Perspectives of Engineering Research Vol. 5. B P International, pp. 12-28. ISBN 978-93-5547-419-3

Ingelsten, Simon and Mark, Andreas and Kádár, Roland and Edelvik, Fredrik (2021) A Backwards-Tracking Lagrangian-Eulerian Method for Viscoelastic Two-Fluid Flows. Applied Sciences, 11 (1). p. 439. ISSN 2076-3417

Ivanov, Danil and Monakhova, Uliana and Guerman, Anna and Ovchinnikov, Mikhail (2021) Decentralized Control of Nanosatellite Tetrahedral Formation Flying Using Aerodynamic Forces. Aerospace, 8 (8). p. 199. ISSN 2226-4310

Izvoltova, Jana and Pisca, Peter (2021) Study on Combinatorial Algorithm in Linear Model. In: Advanced Aspects of Engineering Research Vol. 11. B P International, pp. 92-97. ISBN 978-93-90888-54-2

J

Jagdish, Mukta (2020) Monitoring and Identifying the Occurrence of Oil Spill in the Ocean Using Satellite Image for Disaster Mitigation: Advanced Study. In: Emerging Trends in Engineering Research and Technology Vol. 4. B P International, pp. 88-94. ISBN 978-93-90149-01-8

Ji, Danyang and Ma, Zheng and Zhou, Junjie and Li, Yajun and Shao, Shuai and Yuan, Bingxiang (2021) A Coupled Discrete-Finite Element Method for Shear Strength Analysis of Geogrid-Reinforced Railway Ballast. Advances in Materials Science and Engineering, 2021. pp. 1-11. ISSN 1687-8434

Jiang, Kun and Gu, Pingwei and Huang, Peng and Zhang, Ying and Duan, Bin and Zhang, Chenghui (2022) Determining the Hazards Analysis of Nickel-Rich Lithium-Ion Battery Thermal Runaway under Different States of Charge. In: Novel Perspectives of Engineering Research Vol. 5. B P International, pp. 49-62. ISBN 978-93-5547-419-3

K

Knöös Franzén, Ludvig and Staack, Ingo and Krus, Petter and Jouannet, Christopher and Amadori, Kristian (2021) A Breakdown of System of Systems Needs Using Architecture Frameworks, Ontologies and Description Logic Reasoning. Aerospace, 8 (4). p. 118. ISSN 2226-4310

Kozelkov, O. V. and Kashaev, R. S. and Safiullin, B. R. (2021) Study of Paraffins in Petroleum Oils by Nuclear Magnetic Resonance Relaxometry. In: New Approaches in Engineering Research Vol. 7. B P International, pp. 122-131. ISBN 978-93-91473-55-6

Krishna, Addepalli V. N. and Balamurugan, M. (2020) A New Model for Population Analysis among Different States in India using Machine Learning Algorithm. In: Emerging Trends in Engineering Research and Technology Vol. 4. B P International, pp. 117-121. ISBN 978-93-90149-01-8

Kumar, Raj and Samar, Kapil Kumar and Jain, Sudhir and Mohanty, Sonali Swetapadma (2022) Economic Evaluation of Passive Solar Distillation System: A Recent Study. In: Technological Innovation in Engineering Research Vol. 5. B P International, pp. 99-104. ISBN 978-93-5547-500-8

Kusnadi, Adhi and Wella, . and Winantyo, Rangga and Pane, I. Z. (2022) Investigating the PCA Effect on the 3D Face Recognition System Speed. In: Technological Innovation in Engineering Research Vol. 5. B P International, pp. 76-85. ISBN 978-93-5547-500-8

L

Li, Cheng and Chunlong, Wang and Xi, Wang and Kexu, Chen and Song, Zhengyang (2021) Stability Analysis of Surrounding Rock of Large Section Ultradeep Shaft Wall. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

Lohani, Sanjaya and Kirby, Brian T and Brodsky, Michael and Danaci, Onur and Glasser, Ryan T (2020) Machine learning assisted quantum state estimation. Machine Learning: Science and Technology, 1 (3). 035007. ISSN 2632-2153

Lu, Hongna and Zhang, Huagang and Ma, Kejian and Wu, Qin and Jiang, Lan and Hay, Rotana (2021) Experimental Study and Numerical Study on Shear Bearing Capacity of Shear Key Joints of Reinforced Concrete Open-Web Sandwich Plates. Advances in Materials Science and Engineering, 2021. pp. 1-22. ISSN 1687-8434

Lymperis, Ioannis N. (2024) Ultimate Anti-Seismic Design Method: A Novel Approach. In: Current Approaches in Engineering Research and Technology Vol. 1. B P International, pp. 157-201. ISBN 978-81-972413-0-7

Lyu, Yanlin and Jamil, Muhammad and Ma, Pengfei and He, Ning and Gupta, Munish Kumar and Khan, Aqib Mashood and Pimenov, Danil Yurievich (2021) An Ultrasonic-Based Detection of Air-Leakage for the Unclosed Components of Aircraft. Aerospace, 8 (2). p. 55. ISSN 2226-4310

M

Ma, Yuanzhen and Wang, Meng and Ma, Ruying and Li, Jiamin and Bake, Asiya and Shan, Yadi and Tran, Nguyen Hai (2021) Micropore Characteristics and Gas-Bearing Characteristics of Marine-Continental Transitional Shale Reservoirs in the East Margin of Ordos Basin. Adsorption Science & Technology, 2021. pp. 1-15. ISSN 0263-6174

Marquis, Yewande Alice (2024) From Theory to Practice: Implementing Effective Role-Based Access Control Strategies to Mitigate Insider Risks in Diverse Organizational Contexts. Journal of Engineering Research and Reports, 26 (5). pp. 138-154. ISSN 2582-2926

McGarry, Shannon P. D. and Neilson, Brittany N. and Brown, Noelle L. and Strong, Kaylin D. and Greenlee, Eric T. and Klein, Martina I. and Coyne, Joseph T. (2023) An investigation of cardiac vagal tone over time and its relation to vigilance performance: a growth curve modeling approach. Frontiers in Neuroergonomics, 4. ISSN 2673-6195

Mikhov, Mikho and Zhilevski, Marin (2021) Critical Study and Performance Improvement of the Drive Systems for a Class of Machine Tools. In: Advanced Aspects of Engineering Research Vol. 1. B P International, pp. 90-97. ISBN 978-93-90149-85-8

Mintsa, Honorine Angue and Eny, Gérémino Ella and Senouveau, Nzamba and Nzué, Rolland Michel Assoumou (2023) Optimal Tuning PID Controller Gains from Ziegler-Nichols Approach for an Electrohydraulic Servo System. Journal of Engineering Research and Reports, 25 (11). pp. 158-166. ISSN 2582-2926

Mishra, Banipriya and Mishra, Supriya (2022) An Approach towards Traditional Judicial Systems to Digital Forms of Evidence. In: Technological Innovation in Engineering Research Vol. 5. B P International, pp. 105-117. ISBN 978-93-5547-500-8

Mou, Chunhui and Li, Hui and Dong, Ning and Hui, Shien and Wang, Denghui and Salvestrini, Stefano (2021) Effect of Ce Addition on Adsorption and Oxidation of NO over MnO x /Al2O3. Adsorption Science & Technology, 2021. pp. 1-8. ISSN 0263-6174

Mukunthan, B. and Arunkrishna, M. (2021) Efficient Synergetic Filtering in Big Dataset Using Deep Neural Network Technique. In: Advanced Aspects of Engineering Research Vol. 11. B P International, pp. 116-133. ISBN 978-93-90888-54-2

Muralimohan, N. and Sudha, P. and Palanisamy, T. (2020) Comprehensive Study on Removal Efficiency of Strychonomous Potatorum and Alum as Blended Coagulant for Treatment of Textile Effluent. In: Emerging Trends in Engineering Research and Technology Vol. 4. B P International, pp. 80-87. ISBN 978-93-90149-01-8

Mårtensson, Hans (2021) Harmonic Forcing from Distortion in a Boundary Layer Ingesting Fan. Aerospace, 8 (3). p. 58. ISSN 2226-4310

N

Naik, B. T. and Krishna, M. V. S. Murali and Sri, P. Usha (2022) Determining the Performance Parameters of Carbureted Butanol and Plastic Oil Blended with Diethyl Ether. In: Novel Perspectives of Engineering Research Vol. 5. B P International, pp. 63-76. ISBN 978-93-5547-419-3

Nedelcu, Andreea and Mosteanu, Ofelia and Pop, Teodora and Mocan, Teodora and Mocan, Lucian (2021) Recent Advances in Nanoparticle-Mediated Treatment of Inflammatory Bowel Diseases. Applied Sciences, 11 (1). p. 438. ISSN 2076-3417

O

Odineze, M. C. and Olowokere, J. A. (2023) Kinetic Study and Modeling of Nigerian Sub Bituminous Coal Char Using the Random Pore Technique. Journal of Engineering Research and Reports, 25 (9). pp. 28-38. ISSN 2582-2926

P

Park, Chanho and Kwon, Minho and Suh, Myungwon and Kim, Hyunsoo and Hwang, Sung-Ho (2021) Virtual Integrated Development Environment for the Performance Analysis of Electric Vehicles. In: Advanced Aspects of Engineering Research Vol. 11. B P International, pp. 106-115. ISBN Dr. Anuj Kumar Goel Advanced Aspects of Engineering Research Vol. 11 05 19 2021 05 19 2021 9789390888467 Book Publisher International (a part of SCIENCEDOMAIN International) 10.9734/bpi/aaer/v11 https://stm.bookpi.org/AAER-V11/issue/view/125

Perpignan, André A. V. and Tomasello, Stella Grazia and Rao, Arvind Gangoli (2021) Evolution of Emission Species in an Aero-Engine Turbine Stator. Aerospace, 8 (1). p. 11. ISSN 2226-4310

Pisoni, Galena and Díaz-Rodríguez, Natalia and Gijlers, Hannie and Tonolli, Linda (2021) Human-Centered Artificial Intelligence for Designing Accessible Cultural Heritage. Applied Sciences, 11 (2). p. 870. ISSN 2076-3417

Porro, Marco and Jefferson-Loveday, Richard and Benini, Ernesto (2021) Axial Flow Compressor Stability Enhancement: Circumferential T-Shape Grooves Performance Investigation. Aerospace, 8 (1). p. 12. ISSN 2226-4310

Priya, V. and Priya, C. (2020) A Prudence Introspection of Road Accident Prediction through Deep Learning. In: Emerging Trends in Engineering Research and Technology Vol. 4. B P International, pp. 95-104. ISBN 978-93-90149-01-8

R

Ragul, G. and Ganguly, Arjit and Roy, Pallab and Ghosh, Sandip and Roy, Abhijit (2021) Investigating the Effect of Mechanical Properties of Composite Material under the Influence of Different Commercial Oils. In: Novel Perspectives of Engineering Research Vol. 4. B P International, pp. 177-187. ISBN 978-93-5547-358-5

Ragul, G. and Roy, Pallab and Ganguly, Arjit and Ghosh, Sandip and Sankar, S. and Roy, Abhijit (2021) Studies on Optimization of Tool Wear in Hard Turning of EN 24 Steel Using DoE and Verification through ANOVA and RSM. In: Novel Perspectives of Engineering Research Vol. 4. B P International, pp. 169-176. ISBN 978-93-5547-358-5

Rajagopal, Rajinikanth and Mousavi, Seyyed Ebrahim and Goyette, Bernard and Adhikary, Suman (2021) Coupling of Microalgae Cultivation with Anaerobic Digestion of Poultry Wastes: Toward Sustainable Value Added Bioproducts. Bioengineering, 8 (5). p. 57. ISSN 2306-5354

Ramzan, Muhammad and Shahmir, Nazia (2023) Significance of Nanoparticles Aggregation with Cattaneo-Christov Heat Flux on the Water and Ethylene Glycol Mixture Based MWCNTs-Nanofluid Flow over a Stretching Cylinder. World Journal of Engineering and Technology, 11 (04). pp. 1019-1029. ISSN 2331-4222

Rashmi, N. and Hamsavahini, R. and Mamatha, K. R. (2021) Studies on RF Energy Harvesting for Low Power Devices. In: New Approaches in Engineering Research Vol. 7. B P International, pp. 132-140. ISBN 978-93-91473-55-6

Reddy, A. Nanda Gopal and Bhatnagar, Roheet (2021) A Comprehensive Survey on Data Mining Techniques for Logical Analysis of Data in Content Based Image Retrieval System. In: Novel Perspectives of Engineering Research Vol. 4. B P International, pp. 161-168. ISBN 978-93-5547-358-5

Ren, Jingjing and Zheng, Liuchun and Yang, Feixiong and Yu, Huajian and Zhang, Tao and Zhou, Qianya and Zeng, Hao and Zhang, Lijuan and Meng, Peipei and Selvasembian, Rangabhashiyam (2021) Electron-Scale Insights into the Single and Coadsorption Cd(II) Behaviors of a Metal-Nonmetal-Modified Titanium Dioxide. Adsorption Science & Technology, 2021. pp. 1-15. ISSN 0263-6174

Reynel-Ávila, H. E. and Camacho-Aguilar, K. I. and Bonilla-Petriciolet, A. and Mendoza-Castillo, D. I. and González-Ponce, H. A. and Trejo-Valencia, R. and Azevedo, Diana C. S. (2021) Engineered Magnetic Carbon-Based Adsorbents for the Removal of Water Priority Pollutants: An Overview. Adsorption Science & Technology, 2021. pp. 1-41. ISSN 0263-6174

Ribeiro, Marta and Ellerbroek, Joost and Hoekstra, Jacco (2021) Velocity Obstacle Based Conflict Avoidance in Urban Environment with Variable Speed Limit. Aerospace, 8 (4). p. 93. ISSN 2226-4310

Rushdi, Ali Muhammad Ali and Alsalami, Omar Mutab (2021) Multistate Reliability Evaluation of Communication Networks via Multi-Valued Karnaugh Maps and Exhaustive Search. In: Advanced Aspects of Engineering Research Vol. 1. B P International, pp. 114-136. ISBN 978-93-90149-85-8

S

S., Guruprasad and N., Veena and Mahalakshmi, S. (2021) Application of EEG Signals – A Case Study. In: Advanced Aspects of Engineering Research Vol. 11. B P International, pp. 98-105. ISBN 978-93-90888-54-2

Samad, Abdallah and Villeneuve, Eric and Blackburn, Caroline and Morency, François and Volat, Christophe (2021) An Experimental Investigation of the Convective Heat Transfer on a Small Helicopter Rotor with Anti-Icing and De-Icing Test Setups. Aerospace, 8 (4). p. 96. ISSN 2226-4310

Shaligram, Brahmane Jayant (2022) Study on Organisational Capability and Their Strategic Impact on Firms Market Share. In: Novel Perspectives of Engineering Research Vol. 5. B P International, pp. 77-82. ISBN 978-93-5547-419-3

Shan, Ke and Bao, Chonghao and Li, Dandan and Zheng, Chuanfeng and Aparicio, Santiago (2021) Microscopic Analysis of the Rejuvenation Mechanism and Rejuvenation Effect of Asphalt Binders. Advances in Materials Science and Engineering, 2021. pp. 1-11. ISSN 1687-8434

Siddiqui, Shaziya H. and Uddin, Mohammad Kashif and Isaac, Runit and Aldosari, Obaid F. and Chen, Qiao (2022) An Effective Biomass for the Adsorption of Methylene Blue Dye and Treatment of River Water. Adsorption Science & Technology, 2022. pp. 1-13. ISSN 0263-6174

Srujan, M. J. and Srikanth, Seelam (2023) Experimental analysis of spliced joint connections in GFRP short column. Engineering Solid Mechanics, 11 (4). pp. 411-418. ISSN 22918744

Sudarni, Dyan Hatining Ayu and Aigbe, Uyiosa Osagie and Ukhurebor, Kingsley Eghonghon and Onyancha, Robert Birundu and Kusuma, Heri Septya and Darmokoesoemo, Handoko and Osibote, Otolorin Adelaja and Balogun, Vincent Aizebeoje and Widyaningrum, Bernadeta Ayu and Salvestrini, Stefano (2021) Malachite Green Removal by Activated Potassium Hydroxide Clove Leaf Agrowaste Biosorbent: Characterization, Kinetic, Isotherm, and Thermodynamic Studies. Adsorption Science & Technology, 2021. pp. 1-15. ISSN 0263-6174

T

Teng, Shuai and Liu, Zongchao and Chen, Gongfa and Cheng, Li (2021) Concrete Crack Detection Based on Well-Known Feature Extractor Model and the YOLO_v2 Network. Applied Sciences, 11 (2). p. 813. ISSN 2076-3417

Tsubosaka, Masanori and Maruyama, Masahiro and Huang, Elijah Ejun and Zhang, Ning and Utsunomiya, Takeshi and Gao, Qi and Shen, Huaishuang and Li, Xueping and Kushioka, Junichi and Hirata, Hirohito and Yao, Zhenyu and Yang, Yunzhi Peter and Goodman, Stuart B. (2021) Effect on Osteogenic Differentiation of Genetically Modified IL4 or PDGF-BB Over-Expressing and IL4-PDGF-BB Co-Over-Expressing Bone Marrow-Derived Mesenchymal Stromal Cells In Vitro. Bioengineering, 8 (11). p. 165. ISSN 2306-5354

U

Uchida, Takanori (2017) CFD Prediction of the Airflow at a Large-Scale Wind Farm above a Steep, Three-Dimensional Escarpment. Energy and Power Engineering, 09 (13). pp. 829-842. ISSN 1949-243X

Uchida, Takanori (2017) High-Resolution Micro-Siting Technique for Large Scale Wind Farm Outside of Japan Using LES Turbulence Model. Energy and Power Engineering, 09 (12). pp. 802-813. ISSN 1949-243X

V

Velychkovych, Andrii and Ropyak, Liubomyr and Dubei, Olga and Colangelo, Francesco (2021) Strength Analysis of a Two-Layer PETF-Concrete Column with Allowance for Contact Interaction between Layers. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

Venkadeshwaran, K. and Misra, D. (2021) Numerical Study on 3-D Laser Forming by Discrete Section Circle Line Heating. In: Advanced Aspects of Engineering Research Vol. 1. B P International, pp. 98-113. ISBN 978-93-90149-85-8

Vijayashree, T. and Gopal, A. (2021) Study on Authentication of Classes of Tulsi Leaf for the Extraction of Medicinal Qualities Using Image Processing Technique. In: Novel Perspectives of Engineering Research Vol. 4. B P International, pp. 153-160. ISBN 978-93-5547-358-5

X

Xu, Gang and Qian, Biao and Zheng, Liying and Liu, Wei (2021) Preliminary Evaluation of Nanobacteria on Crystal Retention, CaSR, and Claudin-14 Expression in HK-2 Cells. Advances in Materials Science and Engineering, 2021. pp. 1-9. ISSN 1687-8434

Xu, YouWu and Yao, Jian and Hu, Feng and Zhou, Ying and Jiang, Shuai and Hay, Rotana (2021) Seismic Behavior of Elliptical Concrete-Filled Steel Tubular Columns under Combined Axial Compression and Cyclic Lateral Loading. Advances in Materials Science and Engineering, 2021. pp. 1-14. ISSN 1687-8434

Y

Yang, Deming and Yin, Yifan and Wang, Zhengguang and Zhu, Biyun and Gu, Qiang (2017) Multi-Effect Evaporation Coupled with MVR Heat Pump Thermal Integration Distillation for Separating Salt Containing Methanol Wastewater. Energy and Power Engineering, 09 (12). pp. 772-785. ISSN 1949-243X

Yang, Yuan and Liu, Xin and Luo, Lin and Wei, Wenjing and Wang, Qiang and Zhang, Jiachao and Bing, Haijian (2021) Quantitative Detection of Zinc Oxide Nanoparticle in Environmental Water by Cloud Point Extraction Combined ICP-MS. Adsorption Science & Technology, 2021. pp. 1-10. ISSN 0263-6174

Yi, Qilin and Wei, Gang and Cao, Zhengqin and Wu, Xiaoyu and Gao, Yuanyuan and Kooh, Muhammad Raziq Rahimi (2022) Adsorption Properties of NF3 and N2O on Al- and Ga-Doped Graphene Surface: A Density Functional Theory Study. Adsorption Science & Technology, 2022. pp. 1-15. ISSN 0263-6174

Yin, Huanhuan and Luo, Jiehao and Wang, Baobing and Zhang, Bing and Luo, Shuang and Kong, Dejin (2024) Novel Waveform Design with a Reduced Cyclic Prefix in MIMO Systems. Electronics, 13 (10). p. 1968. ISSN 2079-9292

Z

Zhang, Xijun and Fang, Hongyuan and Du, Mingrui and Shi, Mingsheng and Zhang, Chao and Pavlík, Zbyšek (2021) Experimental Study on the Mechanical Properties of the Fiber Cement Mortar Containing Polyurethane. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

Zhang, Yufei and Yang, Pu and Li, Runze and Chen, Haixin (2021) Unsteady Simulation of Transonic Buffet of a Supercritical Airfoil with Shock Control Bump. Aerospace, 8 (8). p. 203. ISSN 2226-4310

Zhao, Chenwei and Tu, Zecan and Mao, Junkui (2021) Investigation of the Film-Cooling Performance of 2.5D Braided Ceramic Matrix Composite Plates with Preformed Hole. Aerospace, 8 (4). p. 116. ISSN 2226-4310

Ş

Şahin, Emrah and Esen, İsmail and Trzepieciński, Tomasz (2021) Statistical and Experimental Investigation of Hardened AISI H11 Steel in CNC Turning with Alternative Measurement Methods. Advances in Materials Science and Engineering, 2021. pp. 1-17. ISSN 1687-8434

This list was generated on Thu Jul 4 13:17:28 2024 UTC.