Porro, Marco and Jefferson-Loveday, Richard and Benini, Ernesto (2021) Axial Flow Compressor Stability Enhancement: Circumferential T-Shape Grooves Performance Investigation. Aerospace, 8 (1). p. 12. ISSN 2226-4310
aerospace-08-00012-v2.pdf - Published Version
Download (3MB)
Abstract
This work focuses its attention on possibilities to enhance the stability of an axial compressor using a casing treatment technique. Circumferential grooves machined into the case are considered and their performances evaluated using three-dimensional steady state computational simulations. The effects of rectangular and new T-shape grooves on NASA Rotor 37 performances are investigated, resolving in detail the flow field near the blade tip in order to understand the stall inception delay mechanism produced by the casing treatment. First, a validation of the computational model was carried out analysing a smooth wall case without grooves. The comparisons of the total pressure ratio, total temperature ratio and adiabatic efficiency profiles with experimental data highlighted the accuracy and validity of the model. Then, the results for a rectangular groove chosen as the baseline case demonstrated that the groove interacts with the tip leakage flow, weakening the vortex breakdown and reducing the separation at the blade suction side. These effects delay stall inception, improving compressor stability. New T-shape grooves were designed keeping the volume as a constant parameter and their performances were evaluated in terms of stall margin improvement and efficiency variation. All the configurations showed a common efficiency loss near the peak condition and some of them revealed a stall margin improvement with respect to the baseline. Due to their reduced depth, these new configurations are interesting because they enable the use of a thinner light-weight compressor case as is desirable in aerospace applications.
Item Type: | Article |
---|---|
Subjects: | European Scholar > Engineering |
Depositing User: | Managing Editor |
Date Deposited: | 31 Jan 2023 05:38 |
Last Modified: | 17 Jun 2024 05:59 |
URI: | http://article.publish4promo.com/id/eprint/215 |